Description
The
Keymaster Poldiag
is the LATEST PROGRAMMER for Mercedes Benz, Audi, VW. The
Full Complete Set
set with program activation for all supported brands and modules
MAIN FUNCTIONS – MERCEDES-BENZ:
Unique functions
Supports all types of stacks, steering wheel locks, keys, engine controls in Mercedes cars.
Everything is done via OBD or IR
Add, fix, use the ignition, ELV steering lock, engine control, key
ALL KEY LOST at no extra cost.
Unlimited Key Calculations
Fast key generations
No soldering or desoldering required
Download SOFTWARE HERE
Instruction Manual Here
Hardware Included:
OBD Special Interface
Special Programmer + Power adapter NEW type with BENCH MEDC17 Special Functions
MB Key Adapter– for READ, RENEW KEYS with NEC memory. (ALSO Keyless Go Type Renew)
IR cable reader– IR key with cable for operating EZS
EZSELV cable adapter – for connection of EZS, ELV, ECUS, Gearbox modules, ISM modules on the bench.
Audi Key adapter (for programming Audi BCM2 keys)
Special adapter cable for read BCM2 with ENCRYPTED/LOCKED NEC! 2012-2018
Software Licenses Included:
Dash A6 C7, A7 ,A8 D4,Touareg 2010+
BCM2 read, write, by OBD. ELV OFF by OBD. Clone-change data by OBD
PCR2,1 – Read ,write ,repair, update flash and CLONE ECU PCR2.1.
Mercedes EIS
Mercedes ESL
VAG RB4,RB8 functions 7.Mercedes ML163 DAS
PSG 16 Opel ECU
Opel IMMO 1
VAG Ecu ME7/9
Renault ECU (sirius 32/34, EMS)
NEC VDO Dashboard
Nissan 12 digit immo calc
Nissan , Infiniti immo calc
Iveco MS6.x immo data
Renault calculator
VAG ECU EDC16
AUDI A6 Kessy (C6 ,Q7, Touareg)
VAG ECU Magneti MArelli
VW Touareg key learning
VAG ECU EDC16 CRAFTER
Passat B6 key learning
Audi A8 key learning (D3)
VAG ECU Adaptatnion EDC16
VAG ECU adaptation ME7/9
VAG ECU Adaptation Magneti Marelli
VAG ECU Adaptation CRAFTER edc16
VAG EDC
ECU EDC15
Porsche Alarm system (2003-2010)
Renault keys/cards learning
1 Year Subscription Free
OBD / IR Features:
(in the car or after connecting the cable to the ignition switch, lock, motor controller)
– Reading, writing, cleaning EIS on OBD or IR connector
– Calculating passwords
– Modification of data saved in EIS, ELV, ECU, VIN, KM, TP, Hash
– Reading information from the key after IR
– BE keys (also available from us) – have the possibility of saving, erasing and cleaning without risk. OBD IR
– Restoring stations or changing the content / restoring to the factory state
– Cloning of stations – IR downloading
– VIN change
– Erasing TP
– Personalization of new bolts.
DOES NOT REQUIRE ANY SOLDERING,
There is no need to remove the ignition housing
Everything is done via OBD / IR in the car or after connecting the adapter to the ignition plug, lock, motor controller …
Functions of reading, deleting, writing.
Ignition locks, ELV interlocks, engine controls, transmission controllers.
Readout, writing, renewing ALL types of FBS3 stations on the OBD or IR interface (tested on 99% of stations up to 2014)
Personalization, activation of renewed items on the table.
Reading the password from the ignition switch, key without additional charges. No limits
Reading, renewing, modification of data stored in steering locks.
Read, renew drivers 7g Tronic – cooldown about 2 minutes !!
Read, renewed engine controllers.
Read, renew ISM / ESM
COPYING / CLONING all types of stations with NO need to solder or open the ignition.
Keys
EMERGENCY START all key lost- Possibility of emergency start-up in case of lost all keys to get to the workshop
Reading the password directly from the key (V51, V57)
Supports all types of keys: MOTOROLA, NEC, BGA, BE, Chines, VVDI types,
Reads, deletes / renews USED NEC, BE, Motorola keys
BE keys (also available with us) – have the option to change the frequency from the program level (315, 433Mhz) and
MULTIPLE save, delete, clean – Everything is done over IR in a few seconds !!
EMULATION function – Checking the path of the key, resetting the key counter,
ELV/ESL
– support for steering lock – bolt
– Reading ESL by OBD (K-line)
– Restoring ESL Lock (cleaning used)
– ESL exchange
– VIN programming
– TP cleaning
– Automatic adjustment of the ESL Lock
– Checking the operation of ESL
– Repair ESL NEC W204 (fatal error: 0xAA) and older on Morotoli
– Programming and cleaning the emulator (renewal)
Reading / Programming CGW / ZGW eeprom and flash in the following models:
– A-Class (W169)
– B-Class (W245)
– C-Class (W204)
– E-Class (W211)
– E-Class (W212)
– GLK (X204)
– CLK (W207)
– CLS (W218)
– CLS (W219)
– Maybach (W240)
– SLK (R171)
– SLR (R199)
– SLS (R197)
– GL (X164)
– M-Class (W164)
– R-Class (W251)
– SMART
– S-Class (W221)
– CL (W216)
Supported models:
– W164
– W164 2009-
– W166, 197, 212, 218, 246
– W169, 209, 211
– W172, 204, 207, 212
– W203, 463, 639
– W202, 208, 210
– W215, 220
– W230
– W216
– W221
– W639 2009-
These models support counting the password after OBD:
– W164
– W164 2009-
– W166, 197, 212, 218, 246
– W169, 209, 211
– W172, 204, 207, 212 (old, with ELV)
– W216
– W221
– W639 2009-
Driver renewal:
ECU engine / 7-tronic / ISM transmission gear selector –
Correction of the meter after OBD
– C (W204), GLK (X204), CLK (W207), E (W212), SLS (W197), CLS (W218)
– R-Class (W251), GL (X164), ML (W164)
– E-Class (W211), CLS (W219)
– S-Class (W221), CL (216)
– W166, W172, W246, W231
– W205
More videos
HERE
