Description
The 5700 series operator comprises three components making it an easy solution for medium traffic doors that need basic operator functionality. While simple to install and use, this operator consists of a 1600 series door closer with a proven history of dependability. This unit installs in minutes rather than hours and consists of three basic components: inverter, motor and Norton’s 1601 closer body. Quiet and dependable, the 5700 meets the requirements of the Americans with Disability Act (A.D.A.) and ANSI/BHMA A156.4.
Features
Application versatility and ease of adjustment; push and pull side mounting units included
Operates as mechanical surface closer during close cycles, when door is opened manually or if power is turned off; quiet operation
Spring force provides the feel of a normal manual door closer; door can be opened manually if desired.
Unit Activation Options: wall switches, motion sensor, radio frequency device
End-User On/Off Switch
Hold Open options; 0-30 seconds (5 seconds minimum required for ADA and ANSI/BHMA A156.19)
Obstruction Detection: motor stops if door is obstructed during an opening; door closes under manual spring force (not to exceed 15lbs)
“Push and Close”; allows the operator to skip the hold open time when it is not necessary or required
Adjustable door sensitivity
Overload Safety Shut-Off – after two minutes of receiving a door activation signal, the inverter will time out and close the door; prevents motor/inverter damage
Motor Start Delay for Locking Hardware – 0-5 second delay to allow locking hardware to release first
Specifications
Construction
Heavy-Duty cast-aluminum body
Function
Hydraulic Electronic Door Operator
Interior or Exterior
Both
Handing
Non-Handed
Power Input
120 VAC, 60Hz
Power Supply
24 VDC (1.1A)
Finish
689 – Aluminum
Maximum Door Weight
250lbs
Door Width
30″ – 48″
Housing Depth
4-5/8″
Housing Height
5-1/4″
Housing Length
29″
Projection from Wall
4-5/8″
Mounting Style
Regular, Top Jamb, Slide Track, Surface Mount
Max. Door Opening
180 Degrees
ADA
Meets requirements for Americans with Disabilities Act (ADA)
Certifications
ANSI/BHMA A156.19; UL/cUL Listed
Warranty
2-Year Limited Warranty
Downloads
Installation Guide
Wiring Instructions
