Seco-Larm – SLM-MVE-AH1E1-01NQ – HDMI Extender over Single Cat5e/6 – 4K – Up to 164ft (50m)

$70.50

SLM-MVE-AH1E1

Description

SLM-MVE-AH1E1

ENFORCER HDMI Extender over Single Cat5e/6 extends the range of traditional HDMI cabling methods by using an active transmitter and receiver to send video and audio over a single Cat5e/6 cable. HDMI formats as large as 1080p can be transmitted up to 164ft (50m) between the two units with zero signal loss by using integrated circuits in the receiver and transmitter. The extender also supports HDMI loop output, EDID management settings, and one way IR control for remotely controlling HDMI sources and displays.

Extend HDMI over a single Cat5e/6 cable

Supports resolutions from 480i to 1080p with zero signal loss

Transmits up to 164ft (50m) at 1080p over Cat5e/6 cable

HDMI Loop output for local HDMI displays

Plug and play operation – comes as a complete set

IR Pass-through for remote control extension and operation

EDID Management switch

Two (2) 5VDC power supplies included

 

 

Specifications

Input Video Signal

3.3V

Input DDC Signal

5Vp-p (TTL)

Deep Color

24-Bit

Video Format Supported

High-speed HDMI, HDCP 1.2

Audio Formats Supported

LPCM, Dolby-AC3, DTS7.1, DSD

Output Video

HDMI®

Resolutions Supported

1080p/1080i/720p/576p/576i/480p/480i

Range – 4K

Up to 164′ (50m)

Video Amplifier Bandwidth

4.95Gbps

Maximum Input Cable Length

24AWG (15m), 26AWG (10m), 28AWG (5m)

Video Input Connector

HDMI Type A 19-pin female

IR Pass-through Frequency

30~60 kHz

Operating Voltage

5VDC

Power Supply

1A@5VDC (2 Adapters) (2.1mm plug)

ESD Protection (Human Body Model)

±8kV (Air-gap discharge), ±4kV (contact discharge)

Cat5e/6 Wiring Standard

T568-B

Current Draw

Transmitter- 300mA@5VDC Receiver- 200mA@5VDC

Operating Temperature

32°~104° F (0°~40° C)

Operating Humidity

20~90% RH (no condensation)

Dimensions

31/8″x11/16″x25/8″ (79x17x67 mm)

Weight

5.3-oz (150g) (Each)

Maximum Single Link Range

1080p

Specifications

Manual