Description
DAC-KP002
The Stand Alone Access Controller – HID Prox Card Reader & Keypad Controller
is made with 2 relays for controlling up to to 2 doors It is suitable for mounting either indoor or outdoor environments. It is housed in a strong, sturdy and vandal proof Zinc Alloy
with an internal tamper alarm.
This outdoor / indoor waterprooof keypad is built with ease of installation and ease of use in mind. Using a HID proximity card or pin code or a combination of both for access. Fully programmable for up to 2000 users. It can control the Lock , a Security Alarm, Door Bell Alarm, and also can connect with Exit Buttons and Door Contacts.
There are 7 working modes:
Wiegand Reader.
Standalone for single door.
Standalone for two doors.
With external reader for two doors.
Two units interlocked for two doors.
Anti-passback for single door.
Anti-passback for two door.
One Master code
HID Prox Cards may be purchased seperately
Specifications:
Application
Outdoor / Indoor
Input Voltage
AC/DC 12V
User Capacity
2000 users
Can be controlled by Prox Card, PIN Code or Combination of Prox Card and PIN
Programmable
Easily programmable at the lock
Tamper Alarm
Built in light dependent resistor (LDR) for anti tamper
Alarm
Built in buzzer
Keyboard
back-lit for night accessibility , the back light can be set to Normal ON, Normal OFF or
Human-Approach ON.
Card Reading Distance
3-6 cm
Idle Current
<25mA Lock Output Load <1A Alarm Output Load <1A Ring bell load <1A Card reading distance 40mm Max Card Frequency: 125KHz for EM and HID (Not Included) Card transmission format 26-37 bit wiegand Keypad transmission format 4bit, 8bit and Virtual card number Card type EM and HID Enclosure material Strong Zinc Alloy Electroplated anti-vandal case Operating Temperature -49°~131° F ( -45°C～55° C) Operating Humidity 10%～95% non-condensing Environment Conforms to IP68 Waterproof Standards Downloads Complete Installation, Wiring and Programming Instructions
