Von Duprin – 114317-00 – Quiet Electric Latch Conversion Kit – 24VDC – For Series 33A / 35A / 98 / 99 / 22 Devices – Fits In Both 3′ And 4′ Device

$705.00

Quiet electric latch retraction (QEL) provides electronic control of an exit device for environments where limited operational noise is desired. The QEL option is Von Duprin’s solution of choice for hospitals, libraries, museums, and theaters where ambient noise can be disruptive. The QEL can retract a latch bolt momentarily or on an extended, scheduled basis via the access control system.

Description

Quiet electric latch retraction (QEL) provides electronic control of an exit device for environments where limited operational noise is desired. The QEL option is Von Duprin’s solution of choice for hospitals, libraries, museums, and theaters where ambient noise can be disruptive. The QEL can retract a latch bolt momentarily or on an extended, scheduled basis via the access control system.

The modular conversion kit was developed to improve the flexibility, cost, and installation process without the requirement of replacing the entire baseplate assembly. The modular motor assembly provides the same functionality and fits in both 3’ and 4’ device. The modular QEL conversion kit should be selected unless the product is currently a solenoid-driven latch retraction device (EL).

If you previously ordered 958003-00 for mechanical upgrades
 
to latch retraction, we recommend choosing the
 
114317-00
 
modular kit

Features:

Recommended
 
conversion kit solution for
 
most applications

Can easily and
 
quickly be installed in existing product

Energy-efficient motorized latch retraction
 
utilizes a standard 2 amp power supply,
 
enabling longer wire runs from power source

Quiet operation in both mechanical and
 
electronic states

Pushbar is pulled in electronically for
 
quieter operation when dogged

On-board installation and troubleshooting
 
diagnostics built into the device

For use with 33A/35A/98/99 devices

Requires Von Duprin power supply (not included)

Does not include the power transfer from door to frame, the power supply, or the control operator

UL Classified under “Accessories
 
for Single-Point Locks and Latches and Fire Exit Hardware” (UL 10C

Specifications:

Device Sizes

 3 ft and 4 ft

Volts

24VDC

Current Inrush

1.0 A Inrush (0.5 sec)

Current Holding

0.14 A Holding

Part Type

Electric Latch Retraction Kit

Compatibility Series

33A

Rim
, 33A Mortise, and 33A Vertical Rod Devices

35A

Rim, 35A  Mortise, and
35A Vertical Rod Devices

99

Rim
,
99 Mortise
,

and

99 Vertical Rod Devices

98 Rim
,
98 Mortise
(
3ft)
,
 
98 Mortise(4ft)
,
and 98 Vertical Rod Devices

22

Rim
(3ft)
,
 
22 Rim
(4ft)
,
22
 
Mortise, and
 
22 Vertical Rod Devices
(3ft)
,
 
22 Vertical Rod Devices
(4ft)

 

 

Downloads:

Product Data Sheet

Installation Instructions