Description
DH-ADS-110DL-19-1
Dahua’s
24 VDC, 3 A Power Adapter For Dahua PoE Switch.
Features:
Supports 100 VAC to 240 VAC Wide-range Voltage Input
24 VDC, 3 A Power Output
CE, UL, EAC, RCM Certification
Compatible with
VTNS1060A
Network Power Supply and VTNC3000A Two-wire Network Controller
For
VTO1210C-X-S
outdoor station
Five-year Warranty (for products sold through authorized Dahua Dealers)
Become a registered dealer of Dahua
Call 1-800-878-6604 for Dealer Prices!
Technical Specification:
Power Input
Input Voltage, Nominal
100 VAC to 240 VAC, 50/60 Hz
Input Voltage Range
90 VAC to 264 VAC, 47 /63 Hz
Input Current
≤ 1.5 A-rms at 100 to 240 VAC at full load
Efficiency
≤ 1.5 A-rms at 100 to 240 VAC at full load
Inrush Current (Cold Start)
Input fuse operational under cold start at 115/230 Vrms
Leakage Current
3.5 mA, maximum (264 V, 50 Hz)
Certifications
Safety
IEC 60950-1:2005+A1+A2 AS/NZS 60950.1:2011 Inc A1 GMA-501915-EA
Electromagnetic Compatibility (EMC)
FCC CFR 47 Part 15 subpart B ANSI C63.4 – 2009 EN 55022:2010, EN 55024:2010+A1:2015, EN 55032:2015, EN 61000-3-2:2014, EN 61000-3-3:2013, IEC 61000-4-2:2008,
Power Output
Output Voltage, Nominal
24 VDC
Output Voltage Adjust Range
22.8 to 25.20 VDC
Line Regulation
± 2%
Residual Ripple (PARD) 20 MHz BW
300 mVpp (Input Voltage: 115 V to 230 V)
Output Current
3 A, maximum
Rise Time
10% to 90%, ≤ 50 ms at 100 V to 240 V
Input/Output, maximum load
Hold-up Time
10 ms, typical, at 115 VAC Input
20 ms, typical, at 230 VAC Input
Dynamic Load Response
Condition
Load step from 20% to 80% to 20% R/S: 0.10 A/uS
Transient Response Recovery Time
≤ 30 ms
Result
±5%, Dynamic Voltage
Environmental
Operating Temperature
0° C to 40° C (32° f to 104° F)
Operating Humidity
10% to 90% RH
Downloads
Data Sheet
