Description
SLM-MVE-AH1E1
ENFORCER HDMI Extender over Single Cat5e/6 extends the range of traditional HDMI cabling methods by using an active transmitter and receiver to send video and audio over a single Cat5e/6 cable. HDMI formats as large as 1080p can be transmitted up to 164ft (50m) between the two units with zero signal loss by using integrated circuits in the receiver and transmitter. The extender also supports HDMI loop output, EDID management settings, and one way IR control for remotely controlling HDMI sources and displays.
Extend HDMI over a single Cat5e/6 cable
Supports resolutions from 480i to 1080p with zero signal loss
Transmits up to 164ft (50m) at 1080p over Cat5e/6 cable
HDMI Loop output for local HDMI displays
Plug and play operation – comes as a complete set
IR Pass-through for remote control extension and operation
EDID Management switch
Two (2) 5VDC power supplies included
Specifications
Input Video Signal
3.3V
Input DDC Signal
5Vp-p (TTL)
Deep Color
24-Bit
Video Format Supported
High-speed HDMI, HDCP 1.2
Audio Formats Supported
LPCM, Dolby-AC3, DTS7.1, DSD
Output Video
HDMI®
Resolutions Supported
1080p/1080i/720p/576p/576i/480p/480i
Range – 4K
Up to 164′ (50m)
Video Amplifier Bandwidth
4.95Gbps
Maximum Input Cable Length
24AWG (15m), 26AWG (10m), 28AWG (5m)
Video Input Connector
HDMI Type A 19-pin female
IR Pass-through Frequency
30~60 kHz
Operating Voltage
5VDC
Power Supply
1A@5VDC (2 Adapters) (2.1mm plug)
ESD Protection (Human Body Model)
±8kV (Air-gap discharge), ±4kV (contact discharge)
Cat5e/6 Wiring Standard
T568-B
Current Draw
Transmitter- 300mA@5VDC Receiver- 200mA@5VDC
Operating Temperature
32°~104° F (0°~40° C)
Operating Humidity
20~90% RH (no condensation)
Dimensions
31/8″x11/16″x25/8″ (79x17x67 mm)
Weight
5.3-oz (150g) (Each)
Maximum Single Link Range
1080p
Specifications
Manual
