Description
ASP C-19-121 Acura / Honda Ignition Cylinder Lock
IMPORTANT NOTE:
Some older Acura and Honda have a discontinued Lock Housing that will not fit the newer style cylinder. This item is just the Lock Cylinder. If you need the updated Lock Housing you will need
ASP-C-19-239
which includes the newer lock housing and cylinder.
More Details below
Keyway
HD103
Finish
Silver
Keys Included
Yes
Ears
No
Please note:
The locking bar from the original cylinder being replaced must be reused if it is different from the one used with this cylinder.
For Use with the Following
1997 – 1997 Acura CL
1995 – 1998 Acura TL
1994 – 1997 Honda Accord
This is a general guideline for more detailed information see the links below
Acura Ignitions
Honda Ignitions
SPECIAL NOTE ABOUT 1994-97 HONDA ACCORD IGNITION LOCKS:
There is a variation in the end of the plug of the locks that were installed on the car when it was built.
We know of no way to know which design is used without disassembling the old lock to see what is there.
Depending upon which design is used you may be able to rebuild the old lock using our cylinder
C-19-121(this product)
, or you may have to use our
C-19-239
complete lock and housing.
If the end of the plug of the old lock looks like the one in the
picture below
our
C-19-121(this product)
will not work
, you must use the
C-19-239
.
Replacement cylinders with the end of the plug shaped like this one are not available.
If the end of the plug of the old lock
looks like the one in the picture below, either C-19-121(this product) or
C-19-239
WILL work
See More Details
Acura Ignitions
Honda Ignitions
Please Note:
these are aftermarket ignition locks. This means that some parts may be made of different material or have different appearances from what is shown above. Despite the differences, this will NOT affect functionality. This is a purely cosmetic change.
