Description
ENFORCER 4K HDMI Extender over Single Cat5e/6 extends the range of traditional HDMI cabling methods by using an active transmitter and receiver to send video and audio over a single Cat5e/6. HDMI formats as large as 4K
can be transmitted up to 197ft (60m) between the two units with zero signal loss by using integrated circuits in the receiver and transmitter.
Extend HDMI over a single Cat5e/6 cable
Supports resolutions from 480i to 1080p with zero signal loss
Transmits 4K@60Hz up to 197′ (60m) or 1080p@60Hz up to 230′
Plug and play operation – comes as a complete set
Active operation ensures signal strength
IR for remote control extension
One (1) 12VDC power supply included – set can be powered at either end
Specifications
Maximum Single Link Range
4K@60Hz
Deep Color
8bit
Video Format Supported
High-speed HDMI, HDCP 2.2
Audio Formats Supported
LPCM 2/51/7.CH, Dolby Digital, DTS 5.1, Dolby Digital+, DolbyTrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
Output Video
4K@60Hz
Resolutions Supported
4K@60Hz/4K@30Hz/1080p/1080i/720p/576p/576i/480p/480i
Range
1080p: Cat6: Up to 230′ (70m); Cat5e: Up to 164′ (50m)
Range – 4K
Cat6@60Hz: Up to 197′ (60m); Cat5e@60Hz: Up to 164′ (50m)
Video Amplifier Bandwidth
18Gbps
Video Input Connector
HDMI Type A 19-pin female
Video Output Connector
HDMI Type A 19-pin female
IR Frequency
30 ~ 60 kHz
Power Supply
1A@12VDC (1 Adapter) (2.1mm plug)
ESD Protection (Human Body Model)
±8kV (air-gap discharge), ±4kV (contact discharge)
Cat5e/6 Wiring Standard
T-568B
Operating Temperature
32°~104° F (0°~40° C)
Operating Humidity
20~90% RH (no condensation)
Dimensions
3-7/16″x23 / 8″x11/16″ (88x61x17 mm)
Weight
5.08-oz (144g) (each)
Specifications
Manual
